The Application Gallery features COMSOL Multiphysics® tutorial and demo app files pertinent to the electrical, structural, acoustics, fluid, heat, and chemical disciplines. You can use these examples as a starting point for your own simulation work by downloading the tutorial model or demo app file and its accompanying instructions.

Search for tutorials and apps relevant to your area of expertise via the Quick Search feature. To download the MPH-files, log in or create a COMSOL Access account that is associated with a valid COMSOL license. Note that many of the examples featured here can also be accessed via the Application Libraries that are built into the COMSOL Multiphysics® software and available from the File menu.

COMSOL-News-Magazine-2017
COMSOL-News-Magazine-2017-Special-edition-acoustics
COMSOL-News-Magazine-2016

Fine Chemical Production in a Plate Reactor

Plate reactors running under continuous conditions have emerged as candidates to replace batch reactors, primarily in fine chemicals and pharmaceuticals production. One of the advantages of the plate reactor design is that it allows for efficient temperature control of the reacting fluid. For instance, this means that the heat released from strongly exothermic reactions can be readily ...

Startup of a Continuous Stirred Tank Reactor

The hydrolysis of propylene oxide into propylene glycol is an important chemical process with 400,000 metric tons produced worldwide each year. Propylene glycol finds wide application as a moisturizer in foods, pharmaceuticals, and cosmetics. In this example, the startup phase of a continuous stirred tank reactor (CSTR) used to produce propylene glycol is investigated. The non-isothermal ...

Hydrodealkylation in a Membrane Reactor

This application demonstrates how you can access and include external thermodynamic and physical property calculations in your simulation, using the Thermodynamics feature. The example shows how you can easily modify the predefined Plug-flow reactor type in the Reaction Engineering interface to set up a membrane reactor model. At high temperatures and pressures, and in the presence of ...

Tank Series with Feedback Control

This example illustrates how to set up and solve a tank-in-series model in 0D using the Reaction Engineering interface. The model treats a series of three consecutive tank reactors. A feedback loop continuously adjusts the inlet concentration of the first tank to keep the concentration at the outlet of the last reactor close to a set level.

Parameter Estimation for Nonideal Reactor Models

Real reactors can be modeled as combinations of ideal reactors. In this example the so-called "Dead zone model" is utilized. Two ideal CSTRs with interchange are set up to model the real reactor. One CSTR represents the highly agitated region and the other the less agitated region. For this, two parameters relating the volume and exchange rate of the two regions need to be found by comparing ...

Creating a Phase Envelope with a Multicomponent Flash Calculation

* A flash calculation is an equilibrium calculation of a system where several components (species) and phases are present at the same time. This is a demonstration how to use the thermodynamics interface to make flash calculations from data provided external thermodynamic databases. The system in this model is Methane/Ethane/Propane, which would require 3D surfaces to plot the phase envelope. ...

Danckwerts Benchmark

This model compares the solution to the model equations of a tubular reactor using Danckwerts inlet and outlet conditions. A second almost identical model is defined with extra inlet and outlet sections where no reactions occur. The concentration at the beginning of the inlet section is fixed. The results with Danckwerts conditions and with fixed inlet concentrations are compared.

41–47 of 47
Next |
Last